The fume hood is designed for safe laboratory research, chemical reactions and procedures involving the release of hazardous substances. It provides local protection for personnel thanks to the exhaust system and sealed workspace.
Overall dimensions, mm:
height 2300;
depth 750;
width 900;
Height of the hood with an open screen 2600 mm.
Dimensions of the work surface 750x650 mm. The hood consists of two parts.
The hood consists of two parts. The upper part is a workspace with a built-in sink. The lower part of the hood is equipped with a forced-air pedestal with three compartments, the left compartment with a door, the right one with two doors, a water drainage kit, and a shelf. The door hinges are located outside the storage area. The hood is supplied with a sink tap and a water drainage kit.
Design features:
· Disassemblable and welded from a 60x30mm metal pipe and 0.8x1.5mm sheet steel;
· Two-section design: the lower part with a metal door, the upper part with a glass viewing flap;
· Glass flap with the ability to lock in three positions - for safe operation and visual control;
· Gray powder coating - resistant to chemicals, easy to disinfect;
· Adjustable supports (0-30mm) with removable plastic stands are provided to compensate for uneven floors;
· Exhaust opening with a diameter of 125 mm for connection to the ventilation system;
· External and internal anti-corrosion treatment of metal with a polymer coating;
· Working chamber - special chemically resistant coating, stainless steel sink;
· Lifting protective screen – impact-resistant glass with a metal base-handle. Fixed at any height;
· Stationary screen – impact-resistant glass with a metal base for increased visibility;
· Tabletop made of stainless steel grade AISI-304. Tabletop height 35 mm;
· Ventilation panel – for removal of heavy fumes. Removable design. Duct fan with adjustable speed;
· Lighting – a lamp located outside the zone of influence of aggressive environments;
· 10A electrical sockets, 16A, 250V switch;
· Electrical panel – pull-out drawer (10A, 250V sockets (2 pcs), switch).
Advantages of the fume hood:
· Protects against chemical vapors and harmful fumes;
· Optimal dimensions for working with large-sized equipment;
· glass shutter allows visual control of processes without opening the working area;
· increased stability and strength of the structure;
· Complies with safety standards for laboratory equipment.
| Characteristics | |
| Height, mm | 2300 |
| Width, mm | 900 |
| Depth, mm | 750 |
