The main difference between the KrG-3 gynecological chair and the KrG-2 is the ability to adjust the seat height in the range from 500 to 800 mm, which makes this chair convenient for receiving patients with disabilities.
With electric adjustment of the seat lifting height, backrest tilt position, as well as tilts to the Trendelenburg, reverse Antitrendelenburg and Fauvler positions.
The setting is done by the manual control panel.
The soft element is blue. If desired, you can choose a different color.
Purpose: The chair is designed for research, examinations and manipulations in gynecology and urology.
Specifications:
- folded length 1040 mm
- unfolded length 1720 mm
- folded length without removable foot part 675 mm
- unfolded length without removable foot part 1350 mm
- folded height 1495 mm
- unfolded height 910 mm
- width 990 mm
- the height at the seat level in the lower position is 500 mm
- the height at the seat level in the upper position is 800 mm.
- the size of the dorsal section is 980 x 600 mm
- change the angle of inclination of the back section from 0 to 90°
- seat section size 400 x 620 mm
- Trendelenburg 20°
- reverse Trendelenburg 15°
- the size of the foot part is 410 x 610 mm
- load capacity of 150 kg
- Bowl diameter 255 mm
- the height of the bowl is 70 mm
Advantages:
- for the convenience of patient placement, the chair can be used with or without a removable foot part, which allows the patient to take a horizontal position after outpatient surgical procedures for the recovery period.
-the seat is lifted using a Danish-made Linak medical silent lift, which does not require maintenance
Equipment:
handholds
knee pads with the possibility of adjustment in the vertical and horizontal plane
stainless steel bowl
pillow for your head
wired control panel
It is delivered assembled. Transportation is carried out in a wooden arrangement to prevent damage.
Warranty: 12 months
| Characteristics | |
| Height, mm | 910-1495 |
| Width, mm | 1040-1720 |
| Depth, mm | 990 |
